After a session, the question always comes back: where and how to store your surfboard without damaging it or cluttering your home? Between the dampness of the garage, the sunburn that yellows the resin, and boards lying against a wall, bad habits are common. Here is how to do things right.
The most common storage mistakes
Laying your board flat on the floor or leaving it standing against a wall seems practical, but it is the best way to damage it: micro-scratches, dents on the rails, and gradual warping of the foam core from being stored in the wrong place. Add to that direct sun exposure (which yellows and weakens the resin) or excessive humidity, and the board’s lifespan is reduced.
The solution: a wall-mounted surfboard rack
A wall-mounted surfboard rack remains the simplest and most effective solution: the board is raised, ventilated, protected from everyday bumps, and most importantly, showcased rather than hidden in a corner. Two main categories exist:
- The single surfboard rack, for one board — ideal for a bedroom, living room, or hallway.
- The multiple surfboard rack (3 to 6 boards), designed for surfer households or riders who switch between several boards depending on conditions.
And for skate enthusiasts, the principle is the same: a skateboard wall mount allows you to display a deck rather than leaving it lying around in a corner.
Why choose an eco-friendly surfboard rack
A surfboard rack is an object on display year-round: it might as well be built to last, and if possible, made from materials that already have a story. At EDERRAK, two approaches coexist:
- The Plastic Series, designed from post-consumer and post-industrial plastic waste (caps, bottles, and scraps recovered from as far as the beaches of the southern Landes), for a surfboard rack that gives a second life to waste that would otherwise end up incinerated or in a landfill.
- The Wood Series, made of Valchromat—a composite panel made from recycled wood fibers, FSC-certified and low-emission—for a sleeker, stained-wood look.
Both ranges are handcrafted in workshops in the Basque Country, the Landes, and Gironde.
Plastic Series or Wood Series: which one to choose?
The recycled plastic rack focuses on color and a one-of-a-kind feel (each shade depends on the waste available at the time of manufacturing): ideal for a bold decor, starting at €19 for a skateboard mount and €89 for a single surfboard rack. Water-resistant, it can be used indoors or outdoors and holds up to 20 kg. The Valchromat rack (Wood Series) offers a more sober and uniform wood finish, starting at €49: a more discreet choice for a minimalist interior, intended for indoor use, with a maximum load of 10 kg. Both ranges are just as easy to install.
How to install a wall-mounted surfboard rack
Installation remains simple and does not require any special tools:
- Find a solid surface (solid wall or studs) and the desired height.
- Drill at the marked spots and insert the provided wall anchors.
- Screw in the rack, tightening by hand so as not to weaken the material.
- Place the board: it should rest without excessive pressure points on any single spot.
Each EDERRAK rack comes with screws, anchors, and a mounting guide. This hardware is universal: for a drywall partition (plasterboard), equip yourself with specific toggle bolts for better support.
Maintenance of the rack and board
For the Plastic Series, a wipe with water is enough; for stubborn stains, a little white vinegar and a microfiber cloth will do the trick. For the Valchromat Wood Series, regular dusting and, if necessary, a natural oil such as Rubio will help preserve the finish over time.
Frequently Asked Questions
What load can an EDERRAK surfboard rack support?
Up to 20 kg for single recycled plastic racks and 10 kg for Valchromat wood racks, enough to accommodate shortboards, longboards, and mini-mals without any issues.
Is a surfboard rack also suitable for a skateboard or longboard?
The single racks are suitable for both surfboards and longboards; for a classic skateboard, the skateboard mount range is better adapted.
Are specific tools needed for installation?
No: screws, anchors, and a mounting guide are included with each rack; a simple screwdriver or drill is sufficient. For plasterboard, plan to use appropriate wall anchors.
Are colors guaranteed to be identical from one rack to another?
For the Plastic Series, each rack is a unique piece made from recycled plastics: slight variations in shade are normal and are part of the charm of the upcycled material.
In summary
A well-chosen wall-mounted surfboard rack protects the board, frees up floor space, and turns sports equipment into a decorative object. All that remains is to choose the range that fits your home—recycled plastic with bold colors, or more sober Valchromat wood.
Discover the single surfboard racks, the multiple racks, and the Wood Series range at ederrak.com.